Muratec mfx-2200 User Manual Download Page 81

Page: 81 / 382

Getting

Started

1-61

Document

Precautions when loading documents on the ADF

• Be sure any correction fluid, ink, or stamps on the document are complete dry

before loading.

• Remove all metals (staples, paper clips, etc.) before loading the documents.



Failure to do so may cause a malfunction.

• Do not load and print documents with the document guide extended.



The document may be reduced and printed.



Doing so may result in skewed feeding.

• Do not load the documents with different sizes.



The documents may be reduced and printed unnecessarily.



A document jam may occur.



Doing so may result in skewed feeding.

• If you add a new document while scanning, a document jam may occur.
• Do not leave too many scanned documents on the document outlet.



A document jam around the outlet may occur.



DB2-90290-60.indb 61

2007/02/02 12:31:51

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands