Muratec mfx-2200, User Manual

Page: 139 / 382

3-5
3
Basic
F
ax
Functions
Transmission
Transmitting Faxes
Basic transmission
1
Press <Fax> to switch to the fax mode.
2
Load your document (page 1-59).
When transmitting using the document glass, make sure there are no
documents on the ADF.
3
Set each function as necessary.
Using the useful transmission functions (page 3-13)
Using the advanced functions (“Chapter 4 Advanced Fax Functions”,
page 4-3)
4
Enter the destination fax number.
NOTE
• When you enter the fax number, [Location] is displayed on the screen. To check or
delete the entered number, press [Location] (page 4-4).
• If you register the destination fax numbers in the speed dials in advance, you can
specify the destination using the speed dial, one-touch dial, or address book.
Using the numeric keys
Enter the destination number using the numeric keys and
press [Enter].
Enter Fax Number
1234567890
_
Prefix:
Clear Cancel Enter
• Up to 40 digits can be entered.
• If you enter the incorrect number, press [Clear] and delete it.
• You can enter the dialing symbol (page 3-15).
Using the one-touch keys
Press the one-touch key in which the destination is registered.
Fax Ready Fax Mode
2 Apr 2007 13:30 Memory:100%
Resol.
Normal
Contrast
Normal
ScanSize
Auto 1/2
The one-touch keys 01 to 56 correspond to the speed dials
001 to 056. For example, when you register the destination in
the speed dial 002, you can specify the same destination by
pressing the one-touch key 02 as well.
•
•


DB2-90290-60.indb 5 2007/02/02 12:32:38