Muratec mfx-2200 User Manual Download Page 176

Page: 176 / 382

3-42

Setting the transmission confirmation report temporarily

This function can be temporarily set to “On” or “Off” regardless of the

transmission confirmation report setting. This setting will take effect only for

the communication sent/received just after setting. When the communication

sent/received just after setting is complete, the machine returns to the status

registered in the transmission confirmation report setting.

Press <Fax>.

Press <Menu>, select “Tx Report” using the cursor keys, and press
[Enter].

Select “On” or “Off” using the cursor keys and press [Enter].

Press [Close] to return to the standby screen.

NOTE

• When this function is set to ON (issue the Tx report), the icon of the advanced

functions is displayed.

• When you assign “Tx Report” to the soft keys, you can switch ON/OFF of the

transmission confirmation report through one-touch.

• To change the default of the transmission confirmation report, refer to the following

“Setting the transmission confirmation report”.

Setting the transmission confirmation report

When you set the transmission confirmation report default to “On”, the Tx

report is printed after every transmission.

Press <Menu>, <5>, <0>, <2>, <1>, [Enter].

Select “On” using the cursor keys and press [Enter].

Tx Report

Off

Cancel

Enter

DB2-90290-60.indb 42

2007/02/02 12:32:56

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands