Muratec mfx-2200 User Manual Download Page 30

Page: 30 / 382

1-10

No.

Name

Description

Paper output area

Copied or printed paper is output here.

Ventilation slot

Diffuses heat inside the machine.

Power switch

Press “|” to turn on the power. (Refer to “Power
switch”, page 1-20)

Power jack

Used to connect a power cord.

Handset jack

Used to connect an optional handset.

External telephone line jack Used to connect an answer phone etc.

Telephone line jack

Used to connect a phone line cord.

USB port

Connect a USB (Universal Serial Bus) cable to
this port for PC printing and scanning.

10Base-T/100Base-Tx port*

Connect the LAN cable to this port for network
printing and network scanning. Available when
the optional network board has been installed.

Additional phone line jack

Not used in this product.

Equipments and components shown with * are optional.

DB2-90290-60.indb 10

2007/02/02 12:31:24

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands