Muratec mfx-2200 User Manual Download Page 179

Page: 179 / 382

3-45

Basic

Functions

Communication Management

Printing a command list

You can print a list of the delayed documents in memory of which transmission

have not yet been completed.

Press <Menu>, select “List” using the cursor keys and press [Enter].

Select “Journal” using the cursor keys and press [Enter].

Select “Command List” and press [Enter].

If no command is stored, the “No command stored” is displayed.

Press [Yes].

The command list is printed.

NOTE

To shortcut the process, press <Menu>, <1>, <0>, <0>, <1>, [Enter], and press [Yes].

Printout example

1. No.

Command No.

2. Telephone Number

Telephone number of the specified

destination.

3. Tx Time

Time for reserved transmission.

Communication starts at this time.

4. Note

Specified functions are printed.

DB2-90290-60.indb 45

2007/02/02 12:32:58

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands