![Molecular Devices ImageXpress Confocal HT.ai User Manual Download Page 189](http://html1.mh-extra.com/html/molecular-devices/imagexpress-confocal-ht-ai/imagexpress-confocal-ht-ai_user-manual_1823736189.webp)
5084773 A
189
Chapter 8: Maintenance
Perform only the maintenance tasks described in this guide. Contact Molecular Devices to
inspect and perform preventive maintenance service on the instrument each year.
Before you operate the instrument or perform maintenance, make sure you are familiar with
the safety information in this guide. See
If you need to re-install the MetaXpress software or install the software on a new computer,
see the
MetaXpress Installation and Update Guide
included on the Molecular Devices
Knowledge Base at
Maintenance Precautions
To avoid personal injury or damage to the instrument during maintenance procedures,
observe the following precautions:
Some procedures require you to fully shut down the ImageXpress Confocal HT.ai system
and unplug the power cable. See
Shutting Down the System on page 34
.
If the MetaXpress software is running, exit the software before you turn off the instrument.
Some procedures may require that you disconnect the connection between the
instrument and the acquisition computer and power off any attached peripherals, such as
the robot plate-loading arm.
To prevent dust from collecting inside the instrument, keep all access doors closed unless
you are doing maintenance tasks.
Ensure that all components and access doors are closed before you start the instrument.
Access only the user-serviceable components inside the instrument as described in the
section. Avoid contact with other components as they can be damaged or knocked out of
alignment.
CAUTION! Do not touch the autofocus laser.
The following sections describe maintenance procedures that can be done by users to ensure
optimal operation of the instrument.
Routine Maintenance, see page 190
Cleaning the Instrument, see page 190
Light Source Maintenance, see page 192
Replacing the Confocal Disk Box, see page 192
Creating Hardware Profiles, see page 198
Filter Maintenance, see page 200
Objective Maintenance, see page 209
Updating Legacy Shading Correction Settings, see page 233
Turning Off the Status Indicator Lights, see page 236
CAUTION! Maintenance procedures other than those specified in this guide must be
performed by Molecular Devices. When service is required, contact Molecular Devices
Technical Support. See
.
8
Summary of Contents for ImageXpress Confocal HT.ai
