Molecular Devices ImageXpress Confocal HT.ai, User Manual

Page: 128 / 256

ImageXpress Confocal HT.ai High-Content Imaging System User Guide
128 5084773 A
Users and Groups in the Meta Imaging Series Administrator Software
Use the Meta Imaging Series Administrator Software commands to define and configure
settings for individual users and groups in the MetaXpress software. There are two modes for
the Administrator:
Single-User mode, where the Administrator allows you to select hardware settings and
configure drop-ins and toolbars for groups that have already been created.
Multi-User mode, where you can create new groups, add users to different groups, and
define hardware settings for groups.
As a System Administrator, you can work within Multi-User mode to create groups and users.
The software installation includes predefined groups and hardware settings. The number of
groups depends on the configuration of your system. Use the Multiple User Configuration
dialog in the Meta Imaging Series Administrator Software to manage these settings.
Figure 6-1: Multiple User Configuration Dialog
This example shows a system with the following groups defined:
IXM 20x-4x-10x-2x: This group has access to a particular set of objectives.
IXM 20x-4x-10x-40x: This group has access to a particular set of objectives.
MX Analysis Only: This group can perform analysis in the MetaXpress software when the
instrument is powered off.
To allow a group to use the hardware and software settings you create for the group, you must
create users and assign them to the group.