Molecular Devices ImageXpress Confocal HT.ai, User Manual

Page: 186 / 256

ImageXpress Confocal HT.ai High-Content Imaging System User Guide
186 5084773 A
Cleaning Water Immersion Components
Components can come in contact with biological, chemical, and toxic agents. Therefore, all
cleaning procedures should be handled with care. For additional information about cleaning
the system, see
Maintenance on page 189 .
Replace the distilled water in the source bottle if the water immersion system has been
unused for a significant period of time.
Do not reuse the water from the waste bottle due to potential contaminants from the
bottom of plates.
Use a lens cloth to gently wipe the top of a water immersion objective.
Wipe the exterior of the source bottle and the waste bottle before you place the bottles
back into the water immersion controller.
If you plan to store the instrument, you plan to move the instrument, or you do not intend to
use the water immersion system for a long period of time, contact Molecular Devices for
instructions.
Do not access or clean the interior of the water immersion controller other than the area
that holds the bottles.