manualshive.com logo in svg

Mitsubishi Electric FR-A700 Series, Technical Manual

The Mitsubishi Electric FR-A700 Series is a high-performance and reliable industrial product. Enhance your understanding and optimize its operation with the comprehensive Instruction Manual, available for free download at manualshive.com. Unlock the full potential of your Mitsubishi Electric FR-A700 Series with this in-depth manual.

Share
Download
background image

A - 3

2.7.2

Simple magnetic flux vector control [Pr. 71, 80, 90] (F700)   .................................................................................................... 256

2.7.3

General-purpose magnetic flux vector control (Pr. 71, 80, 81*, 800*) (E700)(D700)  .............................................................. 257

2.7.4

Advanced magnetic flux vector control

[Pr. 71, 80, 81, 89, 450, 451*, 453*, 454*, 569*, 800] (A700)(E700)   .......................................................................................... 258

2.7.5

Real sensorless vector control [Pr. 71, 80, 81, 450, 451, 453, 454, 800] (A700)   ................................................................... 261

2.7.6

Vector control [Pr. 71, 80, 81, 359, 369, 800] (A700)   ............................................................................................................. 263

2.8 Applied motor selection and auto tuning  ................................................................................................... 266

2.8.1

Applied motor selection [Pr. 71, 450*] (common)   ................................................................................................................... 266

2.8.2

Offline auto tuning function

[ Pr. 71, 80 to 84*, 90 to 94*, 96, 450*, 453 to 463*, 684*, 859*, 860*] (A700)(E700)(D700)   ..................................................... 268

2.8.3

Online auto tuning function [Pr. 95, 574] (A700)  ..................................................................................................................... 276

2.9 Speed control by Real sensorless vector control and vector control  ....................................................... 280

2.9.1

What is speed control? (A700)  ................................................................................................................................................ 280

2.9.2

Torque limit level setting [Pr. 22, 406, 803, 810 to 817, 858, 865, 868, 874] (A700)  .............................................................. 283

2.9.3

Gain adjustment [Pr. 818 to 821, 830, 831, 880] (A700)   ........................................................................................................ 286

2.9.4

Speed feed forward control, model adaptive speed control [Pr. 828, 877 to 881] (A700)   ...................................................... 289

2.9.5

Torque bias [Pr. 840 to 848] (A700)  ........................................................................................................................................ 291

2.9.6

Speed limit [Pr. 285, 853, 873] (A700)  .................................................................................................................................... 294

2.9.7

Notch filter [Pr. 862, 863] (A700)   ............................................................................................................................................ 295

2.9.8

Troubleshooting (speed control) (A700)   ................................................................................................................................. 296

2.10 Torque control by Real sensorless vector control and vector control ...................................................... 298

2.10.1 Torque control (A700)  .............................................................................................................................................................. 298

2.10.2 Torque command setting [Pr. 304, 305, 432, 433, 447, 448, 803 to 806] (A700) .................................................................... 301

2.10.3 Speed limit [Pr. 807 to Pr. 809, C12 to C15 (Pr. 917, 918), C30 to C33(Pr. 926, 927)) (A700)) .............................................. 304

2.10.4 Gain adjustment [Pr. 824, 825, 834, 835] (A700))  ................................................................................................................... 306

2.10.5 Troubleshooting (torque control) (A700)  .................................................................................................................................. 307

2.11 Position control by vector control  .............................................................................................................. 308

2.11.1 Position control(A700) .............................................................................................................................................................. 308

2.11.2 Conditional position feed function by contact input [Pr. 419, 464 to 494] (A700)  .................................................................... 309

2.11.3 Position control by the inverter pulse train input [Pr. 419, 428 to 430] (A700) ......................................................................... 311

2.11.4 Positioning control by pulse train input of FR-A7AL [Pr.419, 428 to 430] (A700)  .................................................................... 313

2.11.5 Setting the electronic gear [Pr. 420, 421, 424] (A700)  ............................................................................................................. 315

2.11.6 Setting of positioning adjustment parameter [Pr. 426, 427] (A700)  ......................................................................................... 317

2.11.7 Gain adjustment [Pr. 422, 423, 425] (A700)  ............................................................................................................................ 317

2.11.8 Troubleshooting (position control) (A700) ................................................................................................................................ 318

2.12 Adjustment of Real sensorless vector control, vector control .................................................................. 320

2.12.1 Bias and gain of torque (magnetic flux) setting voltage (current) 

[Pr. 241, C16 to C19 (Pr. 919, 920), C34 to C37 (Pr. 928, 929), C38 to C41 (Pr. 932, 933)] (A700)  .......................................... 320

2.12.2 Response level of analog input and noise elimination [Pr. 822, 826, 832, 836] (A700) ........................................................... 323

2.12.3 Speed detection filter and torque detection filter [Pr. 823, 827, 833, 837] (A700)  ................................................................... 324

2.12.4 Excitation ratio [Pr. 854] (A700)) .............................................................................................................................................. 324

2.12.5 Pre-excitation (zero speed control, servo lock) [Pr. 10, 11, 802, 850] (A700)  ......................................................................... 325

2.13 Selection of DC injection brake and regenerative brake ........................................................................... 328

2.13.1 DC injection brake [Pr. 10 to 12] (common)  ............................................................................................................................. 328

2.13.2 Stop selection, start signal selection [Pr. 250] (common)  ........................................................................................................ 330

2.13.3 Selection of regenerative brake and DC feeding [Pr. 30, 70] (common) ................................................................................. 331

2.14  Stall prevention operation and regeneration avoidance operation .......................................................... 335

2.14.1 Overcurrent stall prevention operation [Pr. 22, 23, 48, 49*, 66, 114*, 115*, 148*, 149*, 154*, 156, 157, 277*, 858*, 868*] (common)  

335

2.14.2 Overvoltage stall prevention operation level (common)  ........................................................................................................... 340

2.14.3 Regeneration avoidance function [Pr. 665*, 882, 883, 884*, 885, 886] (common)  .................................................................. 340

2.15 Monitor display and monitor output signal ................................................................................................. 343

2.15.1 Speed display and speed setting [Pr. 37, 144*, 505*, 811*] (common)  ................................................................................... 343

2.15.2 Monitor display selection of the DU/PU, terminal FM/AM, terminal AM0/AM1 

Summary of Contents for FR-A700 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FR-A700 Series

D+H KA 66-TW Original Instructions Manual preview
KA 66-TW
Brand: D+H Pages: 20
Festo DRQD Series Operating Instructions Manual preview
DRQD Series
Brand: Festo Pages: 36
Aerotech ANT95LZS Series Hardware Manual preview
ANT95LZS Series
Brand: Aerotech Pages: 48
Twin Disc TECHNODRIVE MG 5020SC Operating Manual preview
TECHNODRIVE MG 5020SC
Brand: Twin Disc Pages: 54
RIB JOLLY BIG ONE Installation Manual preview
JOLLY BIG ONE
Brand: RIB Pages: 44
Baumuller BM5-SSL Instruction Handbook Manual preview
BM5-SSL
Brand: Baumuller Pages: 80
EUCHIPS EUP12R-1WMC-0 Quick Start Manual preview
EUP12R-1WMC-0
Brand: EUCHIPS Pages: 4
Siro ERBS25LE Series Manual preview
ERBS25LE Series
Brand: Siro Pages: 7
Simu T5 AUTO SHORT Hz Original Instructions Manual preview
T5 AUTO SHORT Hz
Brand: Simu Pages: 32
krispol STARCUS K06 Installation Manual preview
STARCUS K06
Brand: krispol Pages: 168
Helios 05459-001 Installation And Operating Specification preview
05459-001
Brand: Helios Pages: 68
YASKAWA SI-EN3/V Technical Manual preview
SI-EN3/V
Brand: YASKAWA Pages: 62
Eaton PowerXL DC1 Manual preview
PowerXL DC1
Brand: Eaton Pages: 194
Idex ISM 1143 Operating Manual preview
ISM 1143
Brand: Idex Pages: 52
Idex ISMATEC ISM 915 Operating Manual preview
ISMATEC ISM 915
Brand: Idex Pages: 56
Parker Compumotor ZETA6 Series Installation Manual preview
Compumotor ZETA6 Series
Brand: Parker Pages: 81
WEG CFW300-KHMIR Installation, Configuration And Operations Manual preview
CFW300-KHMIR
Brand: WEG Pages: 2
Teac Esoteric D-10 Service Manual preview
Esoteric D-10
Brand: Teac Pages: 58

Brands by name

Popular brands

Load more brands