Mindray BeneView T1, Operator'S Manual

Page: 105 / 286

8-19
8.8.2 Changing Arrhythmia Alarm Settings
To change arrhythmia alarm settings, select the ECG parameter area or waveform area
→
[ ECG Setup ]
→
[ Arrh.
Analysis >> ]. In the pop-up menu, you can set the [ Alm Lev ] to [ High ], [ Med ], [ Low ] or [ Message ], or switch on lethal
arrhythmia analysis alarms only or switch on/off all arrhythmia analysis alarms. In the [ Alarm Setup ] menu from the
[ User Maintenance ] menu, you can enable/disable turning off lethal arrhythmia analysis alarms.
WARNING

If you switch off all arrhythmia analysis alarms, the monitor cannot give any arrhythmia analysis alarm.
Always keep the patient under close surveillance.
NOTE

The priority of lethal arrhythmia alarms is always high. It is unchangeable.
8.8.3 Changing Arrhythmia Threshold Settings
Select the ECG parameter window or waveform area
→
[ Arrh. Analysis >> ]
→
[ Arrh. Threshold ], and you can then
change threshold settings for some arrhythmia alarms. In case an arrhythmia violates its threshold, an alarm will be
triggered. The asystole delay time relates to ECG relearning. When HR is less than 30 bpm, it is recommended to set the
asystole delay time to 10 seconds.
Mindray algorithm
Arrh. event Range Default Step Unit
PVCs High 1 to 100 10 1 /min
Asys. Delay 3 to 10 5 1 s
Tachy High 60 to 300 Adult: 120
Pediatric: 160
Neonate: 180
5 bpm
Brady Low 15 to 120 Adult: 50
Pediatric: 75
Neonate: 90
5 bpm
Extreme Tachy 120 to 300 Adult: 160
Pediatric: 180
Neonate: 200
5 bpm
Extreme Brady 15 to 60 Adult: 35
Pediatric: 50
Neonate: 60
5 bpm
Multif. PVC's Window 3 to 31 15 1 /min
Vtac Rate 100 to 200 Adult, pediatric: 130
Neonate: 160
5 bpm
Vtac PVCs 3 to 99 6 1 /min
Pause Time 1.5, 2.0,2.5 2 / s
Vbrd PVCs 3 to 99 5 1 /min
Vbrd Rate 15 to 60 40 5 bpm