Mindray BeneView T1, Operator'S Manual

Page: 137 / 286

12-7
12.7.5 Switching On NIBP End Tone
The monitor can issue a reminder tone at the completion of NIBP measurement. The NIBP End Tone is off by default. You
can switch it on by accessing the [ NIBP Setup ] menu.
12.8 Assisting Venous Puncture
You can use the NIBP cuff to cause sub-diastolic pressure to block the venous blood vessel and therefore help venous
puncture.
1. Select [ VeniPuncture >> ] from the [ NIBP Setup ] menu. In the popup menu, verify that the [ Cuff Press. ] value is
appropriate. Change it if necessary.
2. Select [ VeniPuncture ].
3. Puncture vein and draw blood sample.
4. Select the on-screen QuickKey to deflate the cuff. The cuff deflates automatically after a set time if you do not
deflate it.
During measurement, the NIBP display shows the inflation pressure of the cuff and the remaining time in venous
puncture mode.