Mindray BeneView T1, Operator'S Manual

Page: 50 / 286

4-2
4.3 Tailoring Your Screens
You can tailor your patient monitor’s screens by setting:

Waveform sweep mode

Wave line size

The color in which each measurement’s numerics and waveform are displayed

The parameter to be monitored.
Changing some settings may be hazardous. Therefore, those setting are password-protected and can be modified by
authorized personnel only. Once change is made, those who use the patient monitor should be notified.
4.3.1 Changing the Wave Line Size
1. Select [ Main Menu ]
→
[ Maintenance >> ]
→
[ User Maintenance >> ]
→
enter the required password.
2. Select [ Others >> ].
3. Select [ Wave Line ] and toggle between [ Thick ], [ Mediate ] and [ Thin ].
4.3.2 Changing Measurement Colors
1. Select [ Main Menu ]
→
[ Screen Setup >> ]
→
[ Measurement Color Setup >> ].
2. Select the color box next to your desired measurement and then select a color from the popup menu.
4.3.3 Choosing a Screen
By selecting [ Main Menu ]
→
[ Screens ]
→
[ Choose Screen ], you can choose eithe r of the following screen:

Normal Screen

Big Numerics screen

ECG 7-Lead Full-Screen if 5-lead or 12-lead ECG is selected

ECG 12-Lead Full-Screen if 12-lead ECG is selected

PiCCO Screen if PiCCO module is configured
If the external display is connected, you can also choose:

ECG 7-Lead Half-Screen if 5-lead or 12-lead ECG is selected

Minitrends Screen

OxyCRG Screen

View Others Screen

PAWP Screen