Mindray BeneView T1, Operator'S Manual

Page: 194 / 286

19-4
19.7 End Case Reports
ECG reports, tabular trends reports, graphic trends reports, NIBP review reports and realtime reports can be set as end
case reports. When you discharge a patient, the system will automatically print out all contents that are set as end case
reports.
For example, to set ECG report as end case report:
1. select [ Main Menu ]
→
[ Print Setup >> ]
→
[ ECG Report >> ].
2. select [ End Case Report ]
→
[ Set as End Case Report ] and then select [ Ok ] from the popup dialog box.
3. set as described in the 19.6.1 Setting Up ECG Reports .
19.8 Printer Statuses
19.8.1 Printer Out of Paper
When the printer runs out of paper, the print request will not be responded. If there are too many print jobs that are not
responded, a printer error may occur. In these cases, you need to install paper and then re-send the print request. Restart
the printer if necessary.
Therefore, you’d better ensure that there is enough paper in the printer before sending a print request.
19.8.2 Printer Unavailable
If the monitor prompts that selected printer is not available, check that the printer is switched on, correctly connected,
and installed with paper.