Mindray BeneView T1, Operator'S Manual

Page: 23 / 286

1-3
1.1.2 Cautions
CAUTIONS

Use only parts and accessories specified in this manual.

At the end of its service life, the equipment, as well as its accessories, must be disposed of in compliance
with the guidelines regulating the disposal of such products. If you have any questions concerning disposal
of the equipment, please contact us.

Magnetic and electrical fields are capable of interfering with the proper performance of the equipment. For
this reason make sure that all external devices operated in the vicinity of the equipment comply with the
relevant EMC requirements. Mobile phone, X-ray equipment or MRI devices are a possible source of
interference as they may emit higher levels of electromagnetic radiation.

Before connecting the equipment to the power line, check that the voltage and frequency ratings of the
power line are the same as those indicated on the equipment’s label or in this manual.

Always install or carry the equipment properly to avoid damage caused by drop, impact, strong vibration or
other mechanical force.

Dry the equipment immediately in case of rain or water spray.
1.1.3 Notes
NOTES

Put the equipment in a location where you can easily view and operate the equipment.

The equipment use a mains plug as isolation means to the mains power supply. Do not locate the equipment
in a place difficult to operate the mains plug.

In normal use, the operator shall stand in front of the equipment.

Keep this manual in the vicinity of the equipment so that it can be obtained conveniently when needed.

The software was developed in compliance with IEC60601-1-4. The possibility of hazards arising from
software errors is minimized.

This manual describes all features and options. Your equipment may not have all of them.