Mindray BeneView T1, Operator'S Manual

Page: 58 / 286

5-2
5.2 Quick Admitting a Patient
Use [ Quick Admit ] only if you do not have the time or information to fully admit a patient. Complete the rest of the
patient demographic details later.
1. Select [ Main Menu ]
→
[ Patient Setup >> ].
2. Select [ Quick Admit ]. If a patient has been admitted at present, select [ OK ] to discharge the current patient. If .no
patient is admitted, you can choose either:

[ Yes ] to apply the data in your patient monitor to the new patient, or

[ No ] to clear any previous patient data.
3. Enter the patient category and paced status for the new patient, and then select [ Ok ].
5.3 Setting the Monitor Location
To set the monitor location, follow this procedure:
1. Select [ Main Menu ]
→
[ Maintenance >> ]
→
[ User Maintenance >> ]
→
enter the required password.
2. Input the following location of the monitor:

[ Facility ]: your facility name.

[ Department ]: your department name.

[ Room No. ]: room number.

[ Bed No. ]: bed number.
5.4 Querying and Obtaining Patient Information
The monitor can obtain patient information from HIS through eGateway. To query or obtain patient information from
HIS,
1. Select [ Main Menu
]
→
[
Maintenance >>
]
→
[
User Maintenance >>
]
→
enter the required password
→
[
Network
Setup >> ]
→
[ Gateway Comm Setup >> ], and set [ IP Address ] and [ Port ]. Set [ ADT Query ] to [ On ].
2. Click patient information area to enter the [ Patient Demographics ] menu.
3. Select [ Obtain Patient Info. >> ] to enter the [ Obtain Patient Information ] menu.
4. Input query condition and then select [ Query ]. The monitor will display the obtained patient information.
5. Select a patient and then click [ Import ]. Then the monitor will update the information of corresponding patient.
6. Select to exit the [ Obtain Patient Information ] menu.
NOTE

The option [Obtain Patient Information] is available in the [Patient Setup] menu only when [ADT Query] is
set to [On].

When obtaining patient information from HIS, the monitor only update patient inforamtion. The patient’s
monitoring data is not changed and the patient is not discharged.