6 List Sequence Measurements
Meas Setup
Min Hold Averaging
Use the min value of all the values to be averaged.
Max Hold Averaging
Use the max value of all the values to be averaged.
Abs Linear Averaging
Convert all values to be averaged to the absolute value.
Sum absolute values and divide by number of averages.
Abs Min Hold Averaging
Convert all values to be averaged to the absolute value.
Use the min value of all the absolute values.
Abs Max Hold Averaging
Convert all values to be averaged to the absolute value.
Use the max value of all the absolute values.
Radio Setup
This allows access to the Radio Setup sub menus.
parameter_table_23.52941
52.94118
Key Path
Meas Setup, Acquisition Setup
Notes
No SCPI : Front panel only
Initial S/W Revision
A.05.00
Help Map ID
35032
Radio Standard
This parameter sets the Radio Standard for the current Acquisition Number.
The measurements that are made on an acquisition are defined by the Meas Bitmap parameter for each
Analysis Step of that acquisiton, and the selected Radio Standard determines which measurements are
available for that acquisition. For example, the ORFS measurement can be included in an analysis step if
the Radio Standard for the acquisition is set to GSM, but not if the Radio Standard is set to WCDMA.
Supported Radio Standards are:
1. NONE
2. GSM
3. EDGE
4. WCDMA
394
Sequence Analyzer User's & Programmer's Reference
