6 List Sequence Measurements
List Sequence Measurements
The SCPI that is used within the Sequence Analyzer mode is the same as in the LTE-TDD mode, except
that two additional nodes are required in the Sequence Analyzer mode: one to identify the List Sequencer
measurement and one to identify the mode from which the measurement comes.
For example:
[:SENSe]:PVTime is replaced with [:SENSe]:LSEQuencer:LTETdd:PVTime:
CALCulate:PVTime is replaced with :CALCulate:LSEQuencer:LTETdd:PVTime:
[:SENSe]:RADio is replaced with [:SENSe]:LSEQuencer:LTETdd:RADio
non_parameter_table_39.50163
6.944
445
9.2647
07
9.264
707
15.67
81
Command
Descript
ion
Notes
[:SENSe]:RADio:STANdard:PRESet B1M4|B3M|B5M|B10M|B15M|B20M
[:SENSe]:RADio:STANdard:PRESet?
Preset to
Standard
[:SENSe]:PVTime:BANDwidth <freq>
[:SENSe]:PVTime:BANDwidth?
BW
Maxim
um is
40MH
z
[:SENSe]:PVTime:RAMP:SEARch:LENGth <time>
[:SENSe]:PVTime:RAMP:SEARch:LENGth?
Ramp
Time
Length
[:SENSe]:PVTime:LIMit:RAMP:URTime <time>
[:SENSe]:PVTime:LIMit:RAMP:URTime?
Ramp
Up time
limit
[:SENSe]:PVTime:LIMit:RAMP:DRTime <time>
[:SENSe]:PVTime:LIMit:RAMP:DRTime?
Ramp
Down
time
limit
[:SENSe]:PVTime:LIMit:POFF:ULINk <real>
[:SENSe]:PVTime:LIMit:POFF:ULINk?
Uplink
Off
power
limit
[:SENSe]:PVTime:THReshold:UP:STARt <rel_ampl>
[:SENSe]:PVTime:THReshold:UP:STARt?
Ramp
Up start
level
[:SENSe]:PVTime:THReshold:UP:END <rel_ampl>
[:SENSe]:PVTime:THReshold:UP:END?
Ramp
Up end
level
[:SENSe]:PVTime:THReshold:DOWN:STARt <rel_ampl>
[:SENSe]:PVTime:THReshold:DOWN:STARt?
Ramp
Down
start
level
[:SENSe]:PVTime:THReshold:DOWN:END <rel_ampl>
[:SENSe]:PVTime:THReshold:DOWN:END?
Ramp
Down
314
Sequence Analyzer User's & Programmer's Reference