6 List Sequence Measurements
Save
The second and fourth parameters specify the directories. The first pair of parameters specifies the
source. The second pair specifies the destination. An error is generated if the source doesn’t exist or
the destination file already exists.
This command will generate an “access denied” error if the destination is a restricted folder (e.g.,
C:\Windows) and the current user does not have Power User or Administrator privileges.
Initial S/W Revision
Prior to A.02.00
Mass Storage Remove Directory (Remote Command Only)
Key path
SCPI Only
Remote Command
:MMEMory:RDIRectory <directory_name>
Notes
The string must be a valid logical path.
Removes a directory. The <directory_name> parameter specifies the directory name to be removed.
All files and directories under the specified directory shall also be removed.
This command will generate an “access denied” error if the folder is a restricted folder (e.g.,
C:\Windows) or is in a restricted folder and the current user does not have Power User or
Administrator privileges.
Initial S/W Revision
Prior to A.02.00
Sequences
These keys allow you to save a Tab separated or CSV file of the setup parameters required to build a
Sequence.
In order to save you must select the Save As button and choose a destination folder.
Key Path
Save, Sequences
Mode
All
Remote Command
:MMEM:STOR:SEQuences: | SLISt | ALISt | SAAList | SSTep
"MySequence.txt"
Example
:MMEM:STOR:SEQ:SLISt "MySequence.txt"
Notes
Available file types are:
−
CSV (Comma delimited) (*.csv)
−
Text (Tab delimited) (*.txt)
Initial S/W Revision
A.05.00
Source Sequence
The list of parameters, that configure steps, that makes up a sequence for the Source.
502
Sequence Analyzer User's & Programmer's Reference
