
6 List Sequence Measurements
Meas Setup
Co
m
ma
nd
BAND4 | BAND5 | BAND6 | BAND7 | BAND8 | BAND9 | BAND10 | BAND11 | BAND12 | BAND13 |
BAND14 | BAND17 | BAND18 | BAND19 | BAND20 | BAND21 | BAND24 | BAND25 | BAND26 |
BAND27 | BAND28 | BAND30 | BAND31
[:SENSe]:LSEQuencer:ACQuire{1:512}:SETup:RADio:BAND?
-To set Radio Band as an array:
[:SENSe]:LSEQuencer:LIST:SETup:RADio:BAND <enum>,<enum>,<enum>,….
[:SENSe]:LSEQuencer:LIST:SETup:RADio:BAND?
The array form of the command is used to make a different setting for each acquisition in the sequence (the number of
array values must match the number of acquisitions; otherwise a "settings conflict" error will occur).
Exa
mp
le
:LSEQ:ACQ2:SET:RAD:BAND NONE
:LSEQ:ACQ2:SET:RAD:BAND?
:LSEQ:LIST:SET:RAD:BAND BAND1, NONE, BAND24, BAND21
:LSEQ:LIST:SET:RAD:BAND?
Not
es
For setting this parameter using SCPI, see
"Programming Acquisitions Via SCPI" on page 376
Stat
e
Sav
ed
Saved in instrument state.
Ran
ge
NONE|BAND1|BAND2|BAND3|BAND4|BAND5|BAND6|BAND7|BAND8|BAND9|BAND10|BAND11|BAND12|BAND13|BAND1
4|BAND17|BAND18|BAND19|BAND20|BAND21|BAND24|BAND25|BAND26|BAND27|BAND28|BAND30|BAND31
Initi
al
S/
W
Revi
sion
A.09.50
Hel
p
Ma
p ID
35291
None
Selecting None for LTE F means that in the Acquisition, the frequency of the LTE FDD signal is determined
by the Frequency parameter in the Acqusition setup.
parameter_table_23.52941
52.94118
Key Path
Meas Setup, Acquisition Setup, Radio Setup, Radio Standard, LTE FDD
Initial S/W Revision
A.09.50
Help Map ID
35292
408
Sequence Analyzer User's & Programmer's Reference