6 List Sequence Measurements
Marker
Key Path
Marker
Example
:CALC:LSEQ:MARK:MODE DELT
Notes
See the description under the “ Marker” key.
State Saved
The marker control mode (Normal, Delta, Off) and X Axis value are saved in instrument state
Initial S/W Revision
A.05.00
Help Map ID
35248
Off
Turns off the selected marker and any of its marker function settings. However, Off does not affect which
marker is selected.
parameter_table_23.52941
52.94118
Key Path
Marker
Example
:CALC:LSEQ:MARK:MODE OFF
Notes
See the description under the “ Marker” key.
State Saved
The marker control mode (Normal, Delta, Off) is saved in instrument state
Initial S/W Revision
A.05.00
Help Map ID
35249
Properties
Opens a menu used to set certain properties of the selected marker.
parameter_table_23.52941
52.94118
Key Path
Marker
Initial S/W Revision
A.05.00
Help Map ID
35250
Select Marker
Duplicate of the Select Marker key under Marker. Selecting a marker here causes the same marker to be
selected under Marker. (That is, there is only one “selected marker”.)
Relative To
Determines which marker that the selected marker is relative to (its reference marker).
Every marker has another marker to which it is relative. This marker is referred to as the “reference marker”
for that marker. This attribute is set by the Marker, Properties, Relative To key. The marker must be a Delta
218
Sequence Analyzer User's & Programmer's Reference
