6 List Sequence Measurements
List Sequence Measurements
Range 2
4
RP 21 Value - the maximum ripple between the upper side of Range 2 and lower side of
Range 1
5
Min Ec(f)1 - the minimum EC(f) in Range 1
6
Max Ec(f)1 - the maximum EC(f) in Range 1
7
Min Ec(f)2 - the minimum EC(f) in Range 2
8
Max Ec(f)2 - the maximum EC(f) in Range 2
parameter_table_23.52941
52.94118
Key Path
Meas
Initial S/W Revision
A.09.40
Help Map ID
0
Inband Emission Power Results
LTE FDD Modulation Accuracy Inband Emission Power Results are detailed here.
These results are part of LTE FDD Modulation Accuracy measurement, and they can be querried by
:MEAS|:READ|: FETCh:LSEQuencer:ACQuire{1:512}:ASTep{1:1000}:IEMission[:POWer]? Or Async fetch
:FETCh:LSEQuencer:ASYNc:ACQuire{1:512}:ASTep{1:1000}:IEMission[:POWer]?/qonly/ This scpi
command only available when LTE-FDD Modulation Accuracy measurement is configured in the specified
analysis step.
LTE FDD Modulation Accuracy Inband Emission Power results are defined as below, they are comma-
separated and the length is 53.
non_parameter_table_
15.52288
51.47059
Index
Result Parameter
0
Results Length - The total length of the results (includes the length field itself), currently
fixed to 53
1
Average Power of Active RBs - the average absolute power of allocated RBs in dBm
2
Number of RBs - the number of RBs in current configuration
3~52
Power Per RB - the absolute power (dBm) per RB. Only the first Number_OF_RBs values are
valid.
parameter_table_23.52941
52.94118
Key Path
Meas
Initial S/W Revision
A.09.50
Help Map ID
0
256
Sequence Analyzer User's & Programmer's Reference
