JEAN LUTZ TARALOG, Instruction Manual

Page: 153 / 158

2 rue du Forbeth – 64110 JURANÇON – France
Tél. (33) 05 59 06 34 22 – Fax (33) 05 59 06 15 99 – Email : contact@jeanlutzsa.fr 03-53GB.doc
MEMOLEC
SCU
eader for the MEMBLOC SC memory card. It transfers data from MEMOBLOC SC to the P.C. by USB
connection.
The transferring process is performed by in the computer residing exploitation programs, reference : EX... (EXEPF,
EXTCT, EXPFW, EXLTPF etc.).
SETTING UP
The MEMOLEC SCU needs specific drivers to work under Millenium, 2000, XP. These drivers have to
be set the firs time you connect the MEMOLEC SCU and for each USB serial port of the computer
When you connect the MEMOLEC SCU to the computer for the first time, Windows displays a window
asking drivers site for MEMOLEC SCU
Indicate drivers site (Jean LUTZ S.A. has provided a 3.5" disk, a CD Rom, a file copied on hard disk)
then press on
bottom.
The MEMOLEC SCU is ready for data transfer.
USING
Connect MEMOLEC SCU to USB device port
Insert a MEMOBLOC, into the MEMOLEC according to the arrows and symbols.
Switch the MEMOLEC on. The number of recordings will be displayed.
Measures :
14
Read the MEMOBLOC by starting the exploitation software.
ERROR MESSAGE
"MEMO IS OUT » MEMOBLOC is absent or badly inserted. Check the way of the MEMOBLOC insertion.
"PROBLEM MEMO" MEMOBLOC is defective. Contact JEAN LUTZ S.A.
CLEARING MEMOBLOC
Press once the red button MENU. The following message will appear
Clear MEMOBLOC ?
→ → → →→ → → →→ → → →→ → → →
Clear MEMOBLOC ?
to validate
Validate by pressing a second time the red MENU button.
Clear MEMOBLOC ?
Please wait
→ → → →→ → → →→ → → →→ → → →
Clear MEMOBLOC ?
To confirm
The clearing takes about 20 seconds.
After the MEMOBLOC clearing the following message appears :
No measures !
Attention
: After the MEMOBLOC'S reset to zero, the total data of MEMOBLOC are lost.
Language displayed on the MEMOLEC SCU is the one selected in the software.
R