PPP Configuration
213
Software Configuration Guide Release 2.10, Revision 1.00
IPCP Terminate-Request:
interval 3000 ms, max 2
Van-Jacobson Compression:
allowed, max-slots 31
Van-Jacobson Decompression:allowed, max-slots 31
Name:
PPPoE
LCP Configure-Request:
interval 3000 ms, max 10
LCP Configure-Nak:
max 5
LCP Terminate-Request:
interval 3000 ms, max 2
LCP Echo-Request:
interval 10000 ms, max 3
MTU:
68 - 1492
MRU:
68 - 1492
Callback:
both
CHAP:
allowed
PAP:
allowed
Authentication:
interval 3000 ms, max 3
IPCP Configure-Request:
interval 3000 ms, max 10
IPCP Configure-Nak:
max 5
IPCP Terminate-Request:
interval 3000 ms, max 2
Van-Jacobson Compression:
allowed, max-slots 24
Van-Jacobson Decompression:allowed, max-slots 31
Van-Jacobson Decompression:allowed, max-slots 31
23.9 Debugging PPP
A set of commands is available to check the status of the PPP connection and the PPPoE session.
Furthermore, two debug monitors help to analyze the dynamic behavior. The commands are listed in
the order which you should follow in case you encounter problems with PPP.
Procedure
To display PPP configuration information
Mode
Configure
Command
Purpose
Step 1
node
(cfg) #show ppp links
[
level
]
Displays status and configuration information of
the Link Control Protocol (LCP) and the
authentication protocol(s) (PAP and/or CHAP).
Check whether the states of the two protocols are
‘Opened’.
level
specifies to level of details displayed (1..4,
default is 1).
Step 2
node
(cfg) #show ppp networks
[
level
]
Displays status and configuration information of
the Network Control Protocol(s) (NCP), in
particular the IP Control Protocol (IPCP). Check
whether the states of this protocol is ‘Opened’.
Under ‘Local configuration options’, you find the
IP address proposed by this SmartNode and
under ‘Local acknowledged options’, the IP
address assigned by the remote peer.
level
specifies to level of details displayed (1..4,
default is 1).
Summary of Contents for SmartWare Release 2.10
Page 2: ...2 Legal Notice Software Configuration Guide Release 2 10 Revision 1 00...
Page 15: ...Terms and Definitions 15 Software Configuration Guide Release 2 10 Revision 1 00...
Page 218: ...218 PPP Configuration no shutdown Software Configuration Guide Release 2 10 Revision 1 00...
Page 272: ...272 Tone Configuration Software Configuration Guide Release 2 10 Revision 1 00...