![background image](http://html1.mh-extra.com/html/inalp-networks/smartware-release-2-10/smartware-release-2-10_software-configuration-manual_2050472109.webp)
Ethernet Port Configuration
109
Software Configuration Guide Release 2.10, Revision 1.00
Procedure
To disable the Ethernet port on
slot
and
port
Mode
Configure
Command
Purpose
Step 1
node
(cfg)#port ethernet
slot port
Enters Ethernet port configuration mode for the
interface on
slot
and
port
Step 2
node
(prt-
eth)[
slot
/
port
]#shutdown
Disables Ethernet port on
slot
and
port
The
no
prefix causes the port to be opened together with the interface to which the port is bound.
Disabling an Ethernet Port Example
The following example shows how the Ethernet port on slot 0
and port 0 of a SmartNode 1000 or
2000 series device.
SN(cfg)#
port ethernet 0 0
SN(prt-eth)[0/0]#
shutdown
Checking the state of the Ethernet port on slot 0
and port 0 shows that the interface was closed.
SN(prt-eth)[0/1]#
show port ethernet 0 1
Ethernet Configuration
-------------------------------------
Port
: ethernet 0 0 1
State
: CLOSED
MAC Address
: 00:30:2B:00:1D:D4
Speed
: 10MBit/s
Duplex
: Half
Encapsulation
: ip
Binding
: wan@router
Frame Format
: standard
Default Service: 0
Moreover the IP interface, which is bound to the Ethernet port on slot 0
and port 0 gets also closed.
Checking the state of the IP interface
wan
indicates this with the CLOSED for parameter state.
SN(prt-eth)[0/1]#
show ip interface
…
------------------------------------------------------------
Context:
router
Name:
wan
IP Address:
172.17.100.210 255.255.255.0
MTU:
1500
ICMP router-discovery:
enabled
ICMP redirect:
send only
State:
CLOSED
Binding:
ethernet 0 0 1/ethernet/ip
…
Summary of Contents for SmartWare Release 2.10
Page 2: ...2 Legal Notice Software Configuration Guide Release 2 10 Revision 1 00...
Page 15: ...Terms and Definitions 15 Software Configuration Guide Release 2 10 Revision 1 00...
Page 218: ...218 PPP Configuration no shutdown Software Configuration Guide Release 2 10 Revision 1 00...
Page 272: ...272 Tone Configuration Software Configuration Guide Release 2 10 Revision 1 00...