Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 78 / 357

78 Basic System Management
SN(cfg)# banner "#\n# Inalp Networks AG\n#\n# The password of all
operators has changed\n# please contact the administrator\n#"
10.5 Setting Time and Date
All SmartNode devices provide time-of-day and date services. These services allow the products to
accurately keep track of the current time and date. The system clock specifies year, month, day, hour,
minutes, and optionally seconds. The time is in 24-hour format yyyy-mm-ddThh:mm:ss and is
retained after a reload.
Procedure
To set both date and time of the clock
Mode
Configure
Command Purpose
Step 1 node (cfg)#clock set yyyy-mm-
ddThh:mm:ss
Sets the system clock to yyyy-mm-ddThh:mm:ss
Note:
SmartWare Release 2.10 includes an integrated SNTP client, which allows synchronization of
time-of-day and date to a reference time server. Refer to Chapter 21, “ SNTP Client Configuration ”,
for more details.
Example: Setting Time and Date
The following example shows the commands used to set the system clock of your device to August 6,
2001 at 16:55:57, if you start from the operator execution mode.
SN(cfg)# clock set 2001-08-06T16:55:57
10.6 Display Clock Information
Procedure
To display the current date and time
Mode
Both in operator and administrator execution
Command Purpose
Step 1 node >show clock
Display the local time.
Example: Display Clock Information
The following example shows the commands used to display the time and date settings of your
device in local time, if you start from the operator execution mode.
SN> show clock
2001-08-06T16:55:57
10.7 Display Time since last Restart
Procedure
Software Configuration Guide Release 2.10, Revision 1.00
To display the time since last restart