Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 203 / 357

DHCP Configuration 203
22.10 Get Debug Output from the DHCP-Server
Procedure
To enable/disable the DHCP-Server debug monitor
Mode
Any
Command Purpose
Step 1 node (cfg) #[no] debug dhcp-server Enables / disables the debug monitor of
the DHCP-Server
Example: Enable DHCP debug monitor
This example shows how to enable the DHCP-Server debug monitor. The debug output shows an
activation of the DHCP-Server, a DHCP-Client requesting a lease, and a DHCP-Client releasing a
lease.
SN(ctx-ip)[router]# debug dhcp-server
21:40:29 DHCPS > New network 'LAN' created
21:41:29 DHCPS > Discover from ethernet:00.10.A4.7C.7A.F8, client
id:01.00.10.A4.7C.7A.F8 via 192.168.1.1
21:41:29
DHCPS > Offering this hosts existing lease 192.168.1.32
21:41:29 DHCPS > Sending DHCP OFFER to 192.168.1.32 via
255.255.255.255 (68)
21:41:29
DHCPS > Deferring save of lease database
21:41:29 DHCPS > Last saved at 2002-12-04T21:40:29, next at 2002-
12-04T21:55:29
21:41:29
DHCPS > Request from ethernet:00.10.A4.7C.7A.F8, client
id:01.00.10.A4.7C.7A.F8 via 192.168.1.1
21:41:29
DHCPS > Offer 192.168.1.32 has been selected
21:41:29 DHCPS > Sending DHCP ACK to 192.168.1.32 via
255.255.255.255 (68)
21:41:29
DHCPS > Deferring save of lease database
21:41:29 DHCPS > Last saved at 2002-12-04T21:40:29, next at 2002-
12-04T21:55:29
21:44:37 DHCPS > Release from ethernet:00.10.A4.7C.7A.F8, client
id:01.00.10.A4.7C.7A.F8 via 192.168.1.1
21:44:37
DHCPS > Lease 192.168.1.32 released
21:44:37 DHCPS > Deferring save of lease database
21:44:37 DHCPS > Last saved at 2002-12-04T21:40:29, next at 2002-
12-04T21:55:29
Software Configuration Guide Release 2.10, Revision 1.00