Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 344 / 357

344 Appendix A
Software Configuration Guide Release 2.10, Revision 1.00
[no] domain-name <name>
[no]
domain-name-server <address>
dtmf-high-frequency-level {mute | <dtmf_high_frequency_level> }
dtmf-low-frequency-level {mute | <dtmf_low_frequency_level> }
dtmf-duration <dtmf_duration>
dtmf-interspace <dtmf_interspace>
dtmf-signal-level {mute | <dtmf_signal_level> }
[no] map {(call_progress_tone <internal_tone_name> <call_progress_tone_name> ) }
exit
profile_voip
[no] profile voip <name>
hybrid-loss
{0|3|6|9}
non-linear-processor-mode {adaptive|disabled|silence}
[no] high-pass-filter
[no] post-filter
[no]
dtmf-relay
[no] dtmf-mute-encoder
[no] echo-canceller
[no]
silence-compression
[no] voice-volume <voice_volume>
dejitter-mode {adaptive|static}
dejitter-max-delay <dejitter_max_delay>
dejitter-max-packet-loss <dejitter_max_packet_loss>
dejitter-shrink-speed
<dejitter_shrink_speed>
dejitter-grow-step <dejitter_grow_step>
dejitter-grow-attenuation <dejitter_grow_attenuation>
[no] fax-data-transmission {fax} {relay}
[no] fax-redundancy {ls-redundancy|hs-redundancy} <redundancy_level>
fax-data-bypass-coder
{transparent|g711_64k|g723_5k3|g723_6k3|g729|g726_16k|g726_24k|g726_32k|g7
26_40k|g727_16k|g727_24k|g727_32k|netcoder_6k4|netcoder_9k6}
fax-data-volume {-18.5|-17.5|-16.5|-15.5|-14.5|-13.5|-12.5|-11.5|-10.5|-9.5|-8.5|-7.5|-
6.5|-5.5|-4.5|-3.5}
fax-jitter-period <fax_jitter_period>
[no] fax-data-error-correction
fax-protocol-mode {FRF.11-backward|FRF.11-synchronized|T.38-TCP|T.38-UDP}
fax-max-bit-rate {2400|4800|7200|9600|12000|14400}
data-modulation-type {single-frequency|V.21-3000|V.27ter-2400|V.27ter-4800|V.29-
7200|V.29-9600|V.33-12000|V.33-14400|V.17-7200|V.17-9600|V.17-12000|V.17-
14400|V.32-4800|V.32bis-7200|V.32bis-9600|V.32bis-12000|V.32bis-14400|V.32-
9600|V.25|ANSam|CNG}
[no] data-hdlc
data-max-bit-rate
{2400|4800|7200|9600|12000|14400}
exit
profile_dhcp-server
[no]
profile dhcp-server <dhcps_profile_name>
network <address> <mask>
[no] include <from> <to>
lease {(<time> {{days|hours|minutes} } ) | infinite }
[no]
default-router <address>