Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 59 / 357

System Image Handling 59
8.4 Factory Configuration
Inalp Networks AG SmartNodes are delivered with a factory configuration stored in the logical region
nvram: of the memory. It is used to initially parameterize the network and component settings of
SmartWare, which make sense at the very beginning. Moreover if a SmartWare is malfunctioning
resetting to the initial state is done by reloading the factory configuration. The factory configuration
consists of:
• Default settings for the IP networking subsystem,
•
Default settings for H.323 and ISoIP gateway subsystem, and
•
Default settings for the quality of service subsystem
As soon as a user-specific configuration is created and stored as startup configuration, the factory
configuration will no longer used but it remains in the persistent memory.. At any time during
operation of a SmartNode it is possible to switch back to the factory configuration. The restoration
procedure for restoring the default settings is described in the companion volume
Hardware
Installation Guide .
8.5 Warning
Avoid downloading any system image if you do not completely understand what you have to do!
8.6 System Image Handling Task List
To load and maintain system images perform the tasks described in the following sections:
• Display System Image Information
• Copy System Images from a Network Server to Flash Memory
• Copy driver software from a Network Server to Flash Memory
8.7 Display System Image Information
Procedure
To display information about system images and driver software
Mode
Administrator execution
Command Purpose
show version
Lists the system software release version, information about
optional interface cards mounted in slots, and other
information.
Example: Display System Image Information
The following example shows the information that is available for a SmartNode 2000 series device
with an optional IC-4BRV interface card mounted in slot 2.
SN# show version
Product name : SN2300
Software Version : SmartWare R2.00 BUILD22031
Supplier
:
Provider :
Subscriber :
Software Configuration Guide Release 2.10, Revision 1.00