Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 179 / 357

SNMP Configuration 179
Command Purpose
Step 1 node (cfg)#snmp target IP-address-of-node
security-name community
Configures a SNMP trap target with IP
address
IP-address-of-node that receives
trap messages of this SmartNode 1000
or 2000 series device, using the security
name
community on the target.
Use the
no command option to remove s SNMP trap target setting.
Example: Specifying The Default SNMP Trap Target
In the following example the NMS running on host with IP address 172.16.224.44 shall be defined as
SNMP trap target. Since the NMS requires that SNMP message headers have a community of
Not4evEryOne the security-name argument is set accordingly.
SN2300-01(cfg)# snmp target 172.16.224.44 security-name Not4evEryOne
20.10 Displaying SNMP Related Information
Displaying the SNMP related configuration settings is often necessary to check configuration
modifications or when determining the behavior of the SNMP agent running on a SmartNode 1000
or 2000 series device.
Procedure
To display information and configuration settings for SNMP
Mode
Configure
Command Purpose
Step 1 node (cfg)#show snmp
Displays information and
configuration settings for SNMP
Example: Displaying SNMP Related Information
This example shows how to display SNMP configuration information.
SN2300-01(cfg)# show snmp
SNMP Information:
hostname : SN2300-01
location : Office, 3rd floor, Inalp Networks AG
contact
: Lorenz Born, Phone 533
Hosts:
172.16.224.44 security-name public
Targets:
172.16.224.44 security-name Not4evEryOne
Communities:
public access-right ro
Not4evEryOne access-right rw
Software Configuration Guide Release 2.10, Revision 1.00