Inalp Networks SmartWare Release 2.10, Software Configuration Manual, Page: 97 / 357

IP Interface Configuration 97
12.13 Traceroute
Procedure
To print the route (list of hops) packets take to network host.
Mode
Either operator or administrator execution
Command Purpose
Step 1 node >traceroute ip-address
prints the route (list of hops) packets take
to network host.
12.14 Examples
12.14.1 Deleting an IP Interface Example
The following example shows how to delete an IP interface named wan , use the no command as
following demonstrated in IP context configuration mode.
List the existing interfaces in the IP context:
SN(ctx-ip)[router]# interface <?>
<interface> New interface
lan Existing interface
wan Existing interface
Delete the interface
wan by using the use the no form of the interface command.
SN(ctx-ip)[router]# no interface wan
List the interfaces again to make sure that interface
wan no longer exists:
SN(ctx-ip)[router]# interface <?>
<interface> New interface
lan Existing interface
Software Configuration Guide Release 2.10, Revision 1.00