Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 270 / 357

270 Tone Configuration
Profiles:
---------
defaultDialtone:
Play 5000ms (425Hz at 0dB)
defaultAlertingtone:
Play 1000ms (425Hz at -7dB)
Pause 4000ms
defaultBusytone:
Play 500ms (425Hz at -7dB)
Pause 500ms
myprofile:
Play 5000ms (425Hz at 0dB and 3000Hz at 0B)
Procedure
To show tone-set profiles
Mode
administrator exec
Command Purpose
Step 1 node #show profile tone-set [ name ] Display all tone-set profiles or a
specific with name
name
Example: Show Tone-Set Profile
The following example shows how to display the tone-set profile.
SN(cfg)# show profile tone-set
Tone set default
------------------------------------------------
DTMF high frequency level: 0 dBm
DTMF low frequency level:
0 dBm
DTMF duration: 0 ms
DTMF interspace: 0 ms
------------------------------------------------
Call progress Tone mapping:
dialtone -> defaultDialtone
alertingtone -> defaultAlertingtone
busytone -> defaultBusytone
27.7 Example
The following example shows how to configure a tone-set profile for UK and apply it to the CS
context. Figure
illustrates the use and map commands. 27-2
Software Configuration Guide Release 2.10, Revision 1.00