Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 129 / 357

Link Scheduler Configuration 129
15.12 Enable Statistics Gathering
Using the debug queue statistics commands enables statistic gathering of link scheduler operations.
The command has optional value, which defines the level of detail. The value is in the range from 1
to 6. In Table 15-5 below the values and their implications are compiled.
Optional
Value
Implication on Command Output
0 Statistic gathering is switched off
1 Display amount of packets transferred
2
3
4
5
6
Table 15-5: Values Defining Verbosity of Command Output
Note: The debug features offered by SmartWare require CPU resources of your SmartNode.
Therefore do not enable statistic gathering or other debug features if it is not necessary. Disable any
debug feature after use with the
no form of the command.
Procedure
Enabling the statistic gathering of link scheduler operations with a certain verbosity of the command
output.
Mode
Source
Command Purpose
Step 1
node (src)[ name ]#debug queue statistics
level
Enables statistic gathering for the
selected class or policy
name . The
optional argument level , which is in the
range from 1 to 6, defines the verbosity
of the command output.
Example: Enable Statistics Gathering
The following example shows how to enable statistic gathering for the source class Web , which is
defined in the service policy profile Level_1 . The level of verbosity for the command output is set to 6,
which is very verbose.
SN> enable
SN# configure
SN(cfg)# profile service-policy Level_1
SN(pf-srvpl)[Level_1]# source class Web
SN(src)[Web]# debug queue statistics 6
Software Configuration Guide Release 2.10, Revision 1.00