Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 343 / 357

Appendix A 343
Software Configuration Guide Release 2.10, Revision 1.00
[no] profile tone-set <name>
decoder-mode {none|tones|voice|both}
[no] queue-limit <value>
[no] set ip dscp <value>
[no] set ip precedence <value>
[no] set ip tos <value>
[no] set layer2 cos <value>
[no]
debug queue statistics [<value> ]
exit
exit
profile_napt
[no]
profile napt <napt-profile_name>
[no] icmp default <host>
[no] static {udp|tcp} <port> <host>
exit
profile_ppp
[no]
profile ppp <profile_ppp_name>
lcp-configure-request interval <interval> max <max>
lcp-configure-nak
max <max>
lcp-terminate-request interval <interval> max <max>
lcp-echo-request interval <interval> max <max>
mtu min <min> max <max>
mru min <min> max <max>
[no] authentication {(chap pap ) | {chap|pap} } interval <interval> max <max>
[no] callback {active|passive|both} interval <interval> max <max>
ipcp-configure-request interval <interval> max <max>
ipcp-configure-nak max <max>
ipcp-terminate-request interval <interval> max <max>
[no] van-jacobson {compression|decompression} max-slots <max>
exit
profile_call-progress-tone
[no]
profile call-progress-tone <name>
[no] play <duration> <freq1> <level1> [<freq2> <level2> ]
flush-play-list
high-frequency
<high_frequency>
low-frequency <low_frequency>
high-frequency-level {mute | <high_frequency_level> }
low-frequency-level {mute | <low_frequency_level> }
on1 <on1>
off1 <off1>
on2 <on2>
off2 <off2>
exit
profile_tone-set