Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 47 / 357

Accessing the Command Line Interface 47
Command Purpose
Step 1 node >show version cli
Displays CLI version
Example: Displaying the CLI Version
The following example shows how to display the version of the current running SmartWare CLI on
your device, if you start from the operator execution mode.
SN> show version cli
CLI version : 2.00
6.13 Display Account Information
The show command in SmartWare can be used to display information about existing administrator
and operator accounts. This command is not available for an operator account.
Displaying account information needs the following procedure:
Procedure
Display user account(s).
Mode
Administrator execution
Command Purpose
Step 1 node #show accounts Displays the currently-configured administrator and
operator accounts
Example: Display Account Information
The following example shows how to display information about existing administrator and operator
accounts.
SN# show accounts
administrator accounts:
super
operator accounts:
support
6.14 Switching to Another Account
To switch from one user account to working in another the su command is used. With this command
a user can change from his current account to another existing account ‘name’. After executing su
with the account name to which the user wants to change as argument, the password of the
particular account has to be entered to get privileged access.
Procedure
To switch from your current working account to another account.
Mode
Administrator or operator execution
Software Configuration Guide Release 2.10, Revision 1.00