Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 83 / 357

Basic System Management 83
10.13 Displaying the Checksum of a Configuration
In SmartWare configuration files, e.g. startup configuration, running configuration, and user-specific
configuration, contain a checksum entry. This checksum informs the user about the validity and
helps distinguish configuration files on the basis of the checksum.
Procedure
To display the checksum of a configuration
Mode
Administrator execution
Command Purpose
Step 1 node #show crc filename Displays checksum of a configuration
Example: Displaying the Checksum of a Configuration
The following example shows how to display the checksum of the configuration test of your device,
if you start from the configuration mode.
SN# show crc nvram:test
File nvram: test:
checksum: 0xfaddc88a
Software Configuration Guide Release 2.10, Revision 1.00