Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 128 / 357

128 Link Scheduler Configuration
SN(ctx-ip)[router]# interface wan
SN(if-ip)[wan]# use profile service-policy Voice_Prio out
15.10 Displaying Link Arbitration Status
The show service-policy command displays link arbitration status. This command supports the
optional argument interface that select a certain IP interface. This command is available in the
operator mode.
Procedure
Displaying the link arbitration status on all interfaces or a certain interface.
Mode
Operator execution
Command Purpose
Step 1 node >show service-policy {interface name } Displays the link arbitration status
Example: Displaying Link Arbitration Status
The following example shows how to display link arbitration status information.
SN> show service-policy
available queue statistics
--------------------------
default
- packets in queue: 10
15.11 Displaying Link Scheduling Profile Information
The show profile service-policy command displays link scheduling profile information of an
existing service-policy profile. This command is only available in the administrator mode.
Procedure
Displaying link scheduling profile information of an existing service-policy profile
Mode
Administrator execution
Command Purpose
Step 1 node #show profile service-policy name Displays link scheduling profile
information of the service-policy
profile
name
Example: Displaying Link Scheduling Profile Information
The following example shows how to display link scheduling profile information of an existing
service-policy profile
VoIP_Layer2_CoS .
SN# show profile service-policy VoIP_Layer2_CoS
VoIP_Layer2_CoS
default (mark layer 2 cos -1)
Software Configuration Guide Release 2.10, Revision 1.00