Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 62 / 357

62 System Image Handling
+/flash/bin/pmc000216a6
4¼—
This script file defines how the driver software image file is to be handled and where it is to be
stored.
Note: You cannot download any driver software image file without an appropriate script file.
Procedure
To download a driver software image file
Mode
Administrator execution
Command Purpose
Step 1 node (cfg)# copy tftp:// node-ip-address / b
flash:
Downloads the script file b from the
TFTP server at address node-ip-address
and starts the driver software image
download process. This progress is
visualized with a counter, counting up
from 0 to 100% according to the
downloaded amount of the file size for
each file that needs to be downloaded.
Example: Copy Driver Softw are from a Netw ork Server to Flash Memory
The following example shows how to download the driver software image file from the TFTP server
at IP address 172.16.36.80. The download is defined by a script file, which has to be downloaded first.
After downloading the script file the driver software image file is downloaded automatically.
SN> enable
SN# configure
SN(cfg)# copy tftp://172.16.36.80/ic-4brvoip/build24028/b flash:
Completed file download /flash/bin/pmc000216a6
SN(cfg)#
Software Configuration Guide Release 2.10, Revision 1.00