Inalp Networks SmartWare Release 2.10, Software Configuration Manual, Page: 339 / 357

Appendix A 339
Software Configuration Guide Release 2.10, Revision 1.00
[no] debug gateway h323 [h323 ] [signaling ras h245 ca caerr channels cm cmapi cmapicb cmerr
debug efrm li liinfo namechan pdlapi pdlchan pdlcomm pdlconf pdlencode pdlerror
show clock
show
uptime
show ip route
show dsp {<slot> | (statistics <slot> ) | (channel statistics <slot> ) | (sw-version <slot> ) | (test-
result <slot> ) }
show profile voip [<show_name> ]
show profile tone-set [<show_name> ]
show profile call-progress-tone [<show_name> ]
show ip interface [<interface_name> ] [router ]
show napt interface <ip_interface_name_show> [router ]
show rip [interface <ip_interface_name_show> [router ] ]
show port ethernet [<print-slot> <print-port> ]
show port serial [<print-slot> <print-port> ]
show framerelay [pvc <print-dlci> ]
show ppp {links|networks} [<level> ]
show pppoe [<level> ]
show log [{event|reset} ]
show service-policy [interface <interface-name> [router ] ]
show version
{(jobs ) | (fg <job> ) }
terminal width {<value> | default }
terminal height {<value> | default }
show terminal
[no] terminal more
logout
su <account>
who
help
show history
show version cli
no
administrator_exec
enable
copy {{running-config|factory-config|startup-config|system:running-config} |
{cli:|preferences:} | <src> | <src> } {{running-config|startup-config|system:running-
config|flash:} | {cli:|preferences:} | <dest> | <dest> }
erase {{startup-config} | {cli:|preferences:} | <config> }
edit
<file>
[no] debug all
[no] debug gateway isoip [isoip ] [<detail> ]
show gateway isoip [isoip ] {sessions | connections } [<detail> ]
isoip {(connect <destip> ) | (disconnect <destip> ) }
[no] debug {pstn | isdn } <slot> <port> {all | layer1 | layer2 | layer3 }
[no] debug dsp [<detail> ]
[no]
debug voip-data
[no] debug dejitter
[no] debug rtp
[no] debug dp-mux
[no] debug tdm
[no] debug t38
[no] debug h235security [<detail> ]