Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 255 / 357

Session Router Configuration 255
Procedure
To create a time of day routing table
Mode
Context CS
Command Purpose
Step 1 node (ctx-cs)[ switch ]#time tbl-name key dest-
interface if-name
or
node (ctx-cs)[ switch ]#time tbl-name key dest-
table tbl-name
Create a time routing table by adding
the first line.
Step 2 Repeat step 1 to add lines for multiple
table entries.
Example: Time of Day Routing Table
SN(ctx-cs)[switch]# time workday1 08:00-17:00 dest-table BestQuality
SN(ctx-cs)[switch]# time workday1 17:00-21:00 dest-interface
VoIPCarrierA
SN(ctx-cs)[switch]# time workday1 21:00-08:00 dest-interface
VoIPCarrierB
26.6.7 Create a Day of Week Routing Table
The Day of Week table is used to route calls according to the day of the week. The days are defined
by the abbreviations mon; tue; wed; thu; fri; sat; and sun. To configure weekday routing table entries
use the following commands starting in the CS context configuration mode.
Procedure
To create a day of week routing table
Mode
Context CS
Command Purpose
Step 1 node (ctx-cs)[ switch ]#weekday tbl-name key
dest-interface if-name
or
node (ctx-cs)[ switch ]#weekday tbl-name key
dest-table tbl-name
Create a day of week routing table by
adding the first line.
Step 2 Repeat step 1 to add lines for multiple
table entries.
Example: Day of Week Routing Table
SN(ctx-cs)[switch]# weekday DayTable1 sat dest-table LeastCost
SN(ctx-cs)[switch]# weekday DayTable1 sun dest-table LeastCost
SN(ctx-cs)[switch]# weekday DayTable1 default dest-interface
Software Configuration Guide Release 2.10, Revision 1.00
VoIPCarrierA