Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 183 / 357

SNMP Configuration 183
Trap Details Description
sysUpTime variable converted into hours, minutes and seconds.
Enterprise
This field shows the OID of the management enterprise that defines the
trap message. The value is represented as an OBJECT IDENTIFIER value
and has a variable length.
Generic Type
The Generic type value is categorized and numbered 0 to 6. They are 0-
coldStart, 1-warmStart, 2-linkDown, 3-linkUp, 4-authenticationFailure, 5-
egpNeighborLoss. The trap type value 6 is identified as enterprise-specific
value. This field shows the value based on the type of trap.
Specific Type
The specific trap type indicates the specific trap as defined in an
enterprise-specific MIB. If the Generic type value is 6 then, this field shows
a value greater than 0. If the generic type value is a value other than 6,
then the field shows a value 0. This field can have values from 0 to
2147483647.
Message
This is a text field. By default, this field will always contain the Varbinds
in the Trap PDU. This can be substituted with text.
Severity
This field shows the Severity or the intensity of the trap. They could be 0-
All, 1-Critical, 2-Major, 3-Minor, 4-warning, 5-Clear and 6-info.
Entity The source IP address from which the Trap was sent is depicted here.
RemotePort This field reveals the port on which the Trap was sent by the originator.
Community The Community string is displayed here.
Node Source
TimeReceived This depicts the Date and Time when the trap was received.
HelpURL
The URL shown here gives more details of the received trap. By default,
the URL file name is
<generic-type value> - <specific-type value>.html
Table 20-2: Details Available in the Trap Details Window
You can stop the listening by clicking the Stop button.
When you need to delete the trap, select the trap to be deleted and click the Delete Trap button or
right click on the trap in the trap table and select option Delete the Selected Rows .
Yet another option in the Trap Viewer is the ParserEditor . The TrapViewer can filter incoming traps
according to certain criteria called the parser criteria. The configuration of the criteria is made
possible by using the parser
editor . Refer to the AdventNet SNMP Utilities documentation for a
detailed description of the parser editor configuration and its use.
20.12 Standard SNMP Version 1 Traps
The SmartWare application software supports the following standard SNMP version 1 traps. The
descriptions are taken from RFC 1215 “
Convention for defining traps for use with the SNMP” .
warmStart TRAP-TYPE
ENTERPRISE snmp
DESCRIPTION
"A warmStart trap signifies that the sending protocol entity is
reinitializing itself such that neither the agent configuration nor
Software Configuration Guide Release 2.10, Revision 1.00
the protocol entity implementation is altered."
::= 1