Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 215 / 357

PPP Configuration 215
Magic Number = 0xb89d9e6b
MRU = 1492 [68,1492]
ACCM = 0xffffffff
Authentication Protocol = { PAP }
Remote acknowledged options:
MRU = 1492 [68,1492]
Magic Number = 0xb89d9e6b
Authentication Protocol = { PAP }
Remote denied options:
Remote rejected options:
PAP:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green
State: Opened
Direction: supplying
Local authentication:
ID: inalp
Password: inalp
Success:
Remote authentication:
ID:
Password:
Success:
Greetings!!
Auth-Req send rate: 3000ms
Max. Auth-Req: 3
Example: Display PPP Netw ork Protocol Information
SN(session)[green]#show ppp networks 4
PPP Network Information:
========================
Network:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green/net
State: up
IPCP:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green/net
State: Opened
Conf-Req send rate: 3000ms
Max. unanswered Conf-Req: 10
Local configured options:
IP Address = 172.16.40.98
IP Compression Protocol = VJC (Max-Slot-Id=31, Comp-Slot-Id=1)
Local acknowledged options:
IP Address = 10.10.10.2
IP Compression Protocol = VJC (Max-Slot-Id=31, Comp-Slot-Id=1)
Remote configured options:
IP Address = 0.0.0.0
IP Compression Protocol = VJC (Max-Slot-Id=24, Comp-Slot-Id=1)
Remote acknowledged options:
IP Address = 10.10.10.1
IP Compression Protocol = VJC (Max-Slot-Id=15, Comp-Slot-Id=1)
Remote denied options:
Remote rejected options:
Example: Display PPPoE Information
Software Configuration Guide Release 2.10, Revision 1.00
SN(session)[green]#show pppoe 4