Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 301 / 357

Gateway Configuration 301
Finally we enable the CS configuration by enabling the ISoIP gateway and the CS context. Note that
we have omitted the binding of the CS interfaces to the ISDN ports. We also display the CS
configurations with the show commands.
SN(cfg)# show gateway h323 config
CURRENT H.323 GATEWAY CONFIGURATION
State : enabled
RAS : enabled, RAS UDP port : 1719
Gatekeeper: auto-discovery (GKID:'GK_ONE')
Call-signaling port : 1720
Q.931-tunneling : disabled
Faststart : enabled
Codecs :
G.711 A-law, rxlen:10, txlen:10
G.711 U-law, rxlen:20, txlen:10
G.723, rxlen:10, txlen:10
G.729, rxlen:10, txlen:10
H.323-ID :
*5
E.164 alias :
Binding: ip-context 'router', interface 'eth00' ip-address
'172.16.32.101'
SN(cfg)#
SN(cfg)#
show context cs config
Following session-router configuration sets are available:
switch
Interfaces:
PublicAccess
H323LAN
Routing tables:
SN(cfg)#
SN(cfg)#
gateway h323 h323
SN(gw-h323)[h323]# bind interface eth00
SN(gw-h323)[h323]# no shutdown
SN(gw-h323)[h323]# exit
SN(cfg)# context cs
SN(ctx-cs)[switch]# no shutdown
SN(ctx-cs)[switch]#
Software Configuration Guide Release 2.10, Revision 1.00