Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 337 / 357

Appendix A 337
Figure Configuration Modes and Bind and Link Commands Overview
34.2 SmartWare 2.10 Command Summary
34.2.1 Introduction
ands are collected in configuration modes as illustrated Figure 34-
Following all commands in the configuration modes are listed. The configuration modes are listed in
order as shown in Figure
command summary is organized as follows:
Mode Name
Enter Command
Command 1
…
Exit
Mode Name
…
Several commands contain a lot of parameters and arguments. The command syntax is described as
follows:
34-1:
The SmartWare 2.10 comm 1
34-1. The
Software Configuration Guide Release 2.10, Revision 1.00