Inalp Networks SmartWare Release 2.10, Software Configuration Manual, Page: 309 / 357

MGCP/SCTP/IUA Configuration 309
Software Configuration Guide Release 2.10, Revision 1.00
Step 1 node (gw-mgcp)[mgcp]#udp-
listening-port port
Sets the UDP port on which the gateway listens
for incoming MGCP commands.
Step 2 node (gw-mgcp)[mgcp]#mgc-udp-
port port
Sets the UDP port number on which the MGC
listens for incoming MGCP commands.
31.9 Debug MGCP/SCTP/IUA
In case of an error or system malfunction there exist some debug monitors to display detailed
information about the MGCP processing.
Procedure
To Enable MGCP gateway debug monitors
Mode
administrator exec
Command Purpose
Step 1 node (cfg)#debug gateway mgcp Displays detailed information on the primary /
secondary MGC discovery process.
Command Purpose
Step 1 node (cfg)#debug gateway mgcp
detail-level
Displays information on the internal MGCP
processing
The detail level ranges from 0 to 3. A configured detail-level includes also the printouts of all lower
levels.
level 0 = errors only
level 1 = brief incoming traffic trace (incoming commands)
level 2 = verbose traffic trace (commands / responses)
level 3 = additional informations (e.g. allocated RTP ports, connection mode etc.)
Procedure
To Enable SCTP debug monitors
Mode
administrator exec
Command Purpose
Step 1 node (cfg)#debug sctp-event detail-
level
Displays information about status changes in
associations.
The parameter detail-level defines
verbosity and can range from 1 through 6
Command Purpose
Step 1 node (cfg)#debug sctp-error detail-
level
Displays errors in the SCTP stack. The
parameter detail-level defines verbosity and can
range from 1 through 6