Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 252 / 357

252 Session Router Configuration
Software Configuration Guide Release 2.10, Revision 1.00
Type Format Description Example
unknown as dialed with all leading zeros or other prefix numbers 0041 31 985xxxx
national (area code) (local extension number) 31 985xxxx
international (country code) (area code) (local extension number) 41 31 985xxxx
Table 19-26-1: ISDN number types
The missing prefix in the national and international number types can complicate the Session Router
configuration. SmartWare therefore offers the possibility to expand these numbers before entering
the first Session Router table. The configured prefix is later removed at the exit of the Session Router
(i.e. when a destination interface is found).
Procedure
To configure number prefix
Mode
Context CS
Command Purpose
Step 1 node (ctx-cs)[ switch ]#
number-prefix national prefix
Adds prefix to all CdPNs of type national before
entering the Session Router.
Step 2 node (ctx-cs)[ switch ]#
number-prefix international
prefix
Adds prefix to all CdPNs of type international
before entering the Session Router.
Example: Configure Number Prefix
SN[switch]# number-prefix national 0041
Input: 31985xxxx Result: 004131985xxxx
SN[switch]# number-prefix international 00
Input: 4131985xxxx Result: 004131985xxxx
26.6.3 Create a Called Party Number Routing Table
The Called Party Number (CdPN) table is used to route calls based on the called party in the call set-
up message. The Session Router scans the table to find the longest matching key starting with the
first digit.
Note: When using overlap dialing the table lookup mechanism waits for more digits until it is sure
that the longest match was found.
Procedure
To create a CdPN routing table
Mode
Context CS