Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 260 / 357

260 Session Router Configuration
Step 4 node (ctx-cs)[ switch ]#delete all Delete all routing tables, functions and
interfaces in the CS context
configuration
26.9 Activate the Session Router Configuration
Prior to activate the Session Router Configuration you can show the whole context CS configuration
and the entire session routing tables.
The Session Router configuration is activated as soon as the CS context comes out of shutdown (e.g.
at boot time or by manually entering command
no shutdown ). You can modify the configuration at
runtime, but changes will not be active immediately. SmartWare offers a number of possibilities to
monitor and debug the CS context and Session Router configurations. For more information refer to
Chapter
24 , “ CS Context Overview ”.
Note: It is not necessary to shutdown the CS context prior to making any configuration changes.
Procedure
To show and activate the session router configuration
Mode
Context CS
Command Purpose
Step 1 node (ctx-cs)[ switch ]#show context cs
config [ level ]
Show the actual CS context
configuration
Step 2 node (ctx-cs)[ switch ]#show running-config
Show the whole running config
includes the session routing tables
Step 3
node (ctx-cs)[ switch ]#debug session-router Enable the Session Router debug
monitor
Step 4 node (ctx-cs)[ switch ]#no shutdown (Re-) activate the whole CS context
configuration including the Session
Router configuration.
26.10 Example
26.10.1 Enterprise Network with Local Breakout and IP Carrier Access
Consider the following Enterprise Network.
Software Configuration Guide Release 2.10, Revision 1.00