Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 269 / 357

Tone Configuration 269
Software Configuration Guide Release 2.10, Revision 1.00
SN# show profile call-progress-tone
Procedure
To assign a tone-set profile to the CS context and to a CS interface
Mode
Context cs
Command Purpose
Step 1 node (ctx-cs)[ switch ]#use tone-set-profile
name
Assign the tone-set profile to the CS
context.
Step 2 node (ctx-cs)[switch]#interface if-type if-
name
Enter CS interface configuration mode.
Step 3 node (if- type )[ if-name ]#use tone-set-profile
name
Assign an other tone-set profile to a CS
interface.
Step 4 node (if- type )[ if-name ]#system Enter system configuration mode
Step 5 node (sys)#local-inband-tones
Enable generation of local in-band
tones
Example: Assign tone-set profiles to CS Context and CS interface and enable
local in-band tone generation
The example shows how to use the SWISS tone-set for the CS context, and use the USA tone-set for
an individual interface.
SN(cfg)# context cs
SN(ctx-cs)[switch]# use tone-set-profile SWISS
SN(ctx-cs)[switch]# interface pstn bri0
SN(if-pstn)[bri0@switch]# use tone-set-profile USA
SN(if-pstn)[bri0@switch]# system
SN(sys)# local-inband-tones
27.6 Show Call-Progress-Tone and Tone-Set Profiles
Use the show commands to display the call-progress-tone profiles as well as the tone-set profiles.
Procedure
To show call-progress-tone profiles
Mode
administrator exec
Command Purpose
Step 1 node #show profile call-progress-tone
[ name ]
Display all call-progress-tone profiles
or a specific with name
name
Example: Show Call-Progress-Tone Profile
The following example shows how to display the call-progress-tone profiles.