Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 243 / 357

CS Interface Configuration 243
SN(if-pstn)[PublicP~]# bind port 2 1
SN(if-pstn)[PublicP~]#
25.9 Examples
25.9.1 V5 Carrier Access
Figure 25-4 shows a V5 carrier access scenario. The association between the subscriber ISDN port and
the switch port is achieved using a port address. This port address creates a virtual extension line
which supports the complete ISDN services and supplementary services
Figure 25-4: V5 Carrier Access Scenario
First we configure the CS interfaces and the call routing. We need two ISoIP interfaces and two PSTN
interfaces. Calls from the ISoIP interface are directly routed to the PSTN interface and vice versa:
SN> enable
SN# configure
SN(cfg)# context cs
SN(ctx-cs)[switch]# interface isoip IpBackbone101
Software Configuration Guide Release 2.10, Revision 1.00