Inalp Networks SmartWare Release 2.10, Software Configuration Manual

Page: 338 / 357

338 Appendix A
• Arguments where you must supply the value are surrounded by <angle brackets>.
• Optional arguments within commands are shown in square brackets ([ ])
• Alternative parameters within commands are separated by vertical bars ( | ).
•
Alternative but required parameters are shown within grouped braces ({}) and are separated
by vertical bars ( | ).
Command Syntax is illustrated by an example in Figure
34-2.
Figure EBNF Syntax
34.2.2 Command Summary
This command summary is valid for SmartWare, Release 2.10, Build 22083. Commands in future
SmartWare releases or builds may be different. The information provided in this chapter is subject to
change without notice.
operator_exec
dropin
ping <address> [<number> ] [timeout <seconds> ] [packet-size <packet_size> ] [ttl <ttl> ]
traceroute <ip_host> [probe-count <probe_count> ] [timeout <seconds> ] [destination-port
<port_number> ] [min-ttl <min_ttl> ] [max-ttl <max_ttl> ] [verbose ] [packet-size
<packet_size> ] [mtu ]
[no] call {(<callkey> {(dial <interface> [<called-party> [<calling-party> ] ] ) | (overlap <called-
party> ) | accept | drop | (display <display-data> ) | (keypad <keypad-data> ) |
(user <user-data> ) | hold | (suspend [<parkcode> ] ) | retrieve | (resume
[<parkcode> ] ) } ) | autoaccept | (bearer-capability {audio | speech | digital } ) |
({called-numbering-plan | calling-numbering-plan } {e164 | private } ) | ({called-type-
of-number | calling-type-of-number } {unknown | national | international |
subscriber } ) }
clear
show call {sessions | config } [<detail> ]
[no] debug call [<detail> ]
show port {pstn | isdn } [<detail> ]
34-2:
Software Configuration Guide Release 2.10, Revision 1.00