English
-1-
I
mportant Notice:
Please install the driver first and then
connect VideoCAM SlimClip to the USB
port.
Please read the important notice before the installation.
1.
Installing VideoCAM SlimClip software
a.
Insert the VideoCAM SlimClip software CD into CD-ROM drive.
b.
After few seconds, the setup screen will show the picture of
VideoCAM SlimClip. Click the “
Utility Driver
” then simply follow
the on-screen instructions.
c.
Please remember to install
DirectX
of the CD-ROM.
Notice:
If the setup screen doesn’t show the picture of VideoCAM
SlimClip, please precede the following installation:
z
Go to the taskbar and click Start then Execute.
z
Type D
：
\SETUP.EXE , then click Enter key.
(Suppose your CD-ROM is in Drive D)
2.
Connect the VideoCAM SlimClip to
your computer.
Connect the VideoCAM SlimClip to the USB
port as shown on the right drawing.
3.
To get rid of driver installation, please
go to the taskbar and follow “Start
Æ
Program
Æ
VideoCAM SlimClip
Æ
VideoCAM SlimClip
Uninstall, then follow the on-screen instruction to remove the
installation.
USB Port
4.
You can install the recognize software for video conferencing
or chat with your friends.
